TCS 2010, KA-N1 N Scale Keep Alive Capacitor
All-New Keep Alive Capacitor for N Scale!
All-New Keep Alive Capacitor for N Scale!
TCS has introduced the KA-N1, the first Keep Alive capacitor for N scale installation!
TCS Item #: 2010
Dimensions: 0.26” x 0.363” x 0.136” or 6.6mm x 9.2mm x 3.5mm
Scale: N-Scale
Input Rating: Less than or equal to 16V DC; 100mA (Max, Self)
Output Rating: 10V DC (Max); 1000uF
Keep-Alive Owner Manual & Installation Guide
Download KA-N1.pdf (872 KB)
Keep Alive® Decoder Compatibility With TCS Decoders
TCS Keep Alive® (KA) devices are designed to operate with all TCS (or any other Keep Alive® ready) decoders. Decoders with a corresponding socket can be used with the KA4-P. This will be detailed in the decoder literature if the decoder has the socket.
!!!WARNING!!! This product purposely does not include a protective wrapping, in order to minimize the size as much as possible. As a result, the components on the top side are exposed. Ensure there is absolutely no chance of contact with metal surfaces!
Keep Alive® Decoder Compatibility With Non-TCS Decoders
If you would like to attach a Keep Alive® unit to a non-TCS decoder, you need to connect the wires across the output of the bridge rectifier on the decoder. You will need to consult your decoder manufacturer for a schematic or wiring diagram.
Installation Notes for TCS Decoders
1. Refer to the product page for your TCS decoder for compatibility information, such as wiring diagrams, for Keep Alive®.
2. Connect the Blue wire from the Keep Alive® to the Blue wire (or otherwise indicated “common” positive Voltage source) of your decoder.
3. Connect the Black & White striped wire to the Black & White striped wire wire (or otherwise indicated “ground”) of your decoder.
4. That’s it! Your locomotive is ready to run over the most treacherous of tracks.
Manufacturer's Suggested Retail Price | 19.95 |
---|---|
Scale | N |
Item Returns | This item can be returned |