Peco SL-E199 Electrofrog Code 75 3-Way Turnout

Peco SL-E199 Asymmetric Finescale Electrofrog Three Way Turnout

Two interlaced turnouts in one piece of trackwork. Invaluable around stations and yards or wherever space is limited.

Nominal radius 1829mm, angle 12 degrees, length 273mm.

Code 75 Finescale is for those enthusiasts who wish to operate trains on scale height rail. Most modern manufacturers currently produce locomotives and rolling stock suitable for use with Code 75 track. However, the advice is - test your rolling stock on a Finescale turnout before deciding to use Fine Trackage as flanges and back-to-back dimensions often vary.

Most Finescale Streamline turnouts (points) are only available with 'live' frogs - Electrofrog, except for the long & short crossings and the single and double slips which are also available with 'dead' frogs - Insulfrog.

For joining, use SL-110 or PL-81 pre-wired metal rail joiners to electrically join or SL-111 nylon rail joiners where an electrical break is required.

Can be joined to Code 100 Setrack & Streamline track by using either SL-112 dual standard rail joiners or SL-113 transition track.

Fitted with over center springs for immediate hand control it automatically isolates the tracks not in use.

For remote control on permanent layouts, two point motors such as Peco PL-10 or Seep PM-2 can be fitted.

Can be fixed with SL-14 track pins.

To assist in layout planning, full size turnout plans are available to download from the Peco website.