ESU 58513 LokSound V5 MM XL Screw, Large Scale Sound Decoder With Screw Terminals, Steam

MSRP $249.99
Normally Available Within 10 Days if Out of Stock

LokSound in Action

*All Sounds files featuring "Full Throttle" capabilities end with the letters FT.

Don't forget your TDS Speakers & Enclosures!

ESU 58513 LokSound V5 MM** XL Screw, Large Scale Sound Decoder,  With Screw Terminals
51 mm x 41 mm x 14 mm (2.01 in x 1.61 in x 0.55 in)

*Programmed with the Steam sound file of your choice 

**MM Designates this a multiprotocol type decoder able to operate using Motorola, Selectrix and MFX/M4 protocol systems [primarily European based]

DCC users will primarily want the V5 DCC decoder versions

For Scale: O, S, G

The LokSound V5 XL decoder is intended for use in all applications where the required power exceeds the current limits of a LokSound 5 decoder.  Ideally, these are 0 and S scale locomotives. Despite its compact dimensions of only 50.8 mm x 25.4 mm x 14 mm, the V5 XL is equipped with a dual speaker output and integrated PowerPack. The LokSound V5 XL Screw is equipped with multiple screw connectors 

“Full Throttle” Decoder Operation for Diesels
It is often challenging to make a scale model perform like it has the mass of a 260,000lb locomotive pulling 5,000 tons or more! Some of this can be done with BEMF - when the loco “feels” a load, it will automatically rev up to work harder to pull this actual load. But this is often a flawed method in modeling. Today, model train car wheels are so free rolling the cars often do not simulate sufficient drag to replicate a typical prototype situation. Also, often we do not sufficiently weigh our cars to represent a scaled-down version of the prototype.

One of the biggest problems with BEMF controlled load is in our modeling and operations we often “simulate” loads inside a closed car. The payload inside a prototype car can weigh as much as 100-tons more than the car itself. This is especially important at operating sessions. Empties in and Loads out or vice versa. There is no way for a decoder to know the proposed weight of the cars it is pulling. Our “car cards”, showing whether a car is loaded or empty, are seen only by the operator, not by our decoders!

To compensate for what the decoder cannot know, we have created Full Throttle decoder features! FT features include “Drive Hold”, “Run 8”, “Coast”, improved “Dynamic Brakes” and a new “Independent Brake” feature.

Operating Modes
The Loksound V5 decoder can be used on analog DC, DCC and AC powered layouts. The V5 decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.

The LokSound5 is a true multiprotocol decoder. It masters the data format DCC as well as Motorola®, Selectrix® and M4. Thanks to RailComPlus®, the decoders log on fully automatically to a suitable digital central unit and CV values on the main track can be read out with suitable control panels. For panels that can only program the CVs from 1-255, there are auxiliary registers.

Motorola® users benefit from up to 28-speed steps with 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol allows automatic login to mfx® compatible panels.

The LokSound V5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 and for all practical purposes, one cannot detect any difference to the original. A dual class D audio power amplifier with 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.

The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail movements. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.

The LokSound 5 XL decoder is equipped with 12 amplified function outputs. In addition, there are 7 additional logic level outputs available, which can also control (4 pieces) RC servos and SUSI expansion modules. The brightness of each output may be adjusted separately. 4 sensor inputs may be employed in order to trigger functions.

Motor control
The LokSound 5 XL decoder provides with up to 5.0A peak, 4.0A continuous current. Motor control of the LokSound V5 has been improved using variable PWM pulse frequency ranging from 10 kHz to 50 kHz. This assures perfect silent operation, particularly for coreless motors, making the typical hum a thing of the past. Load control can now be adjusted with up to 10 separate CVs and can manage even the most difficult cases. The unique “Auto-Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. 

More Information
Manufacturer's Suggested Retail Price 249.99
Scale O
Write Your Own Review
You're reviewing:ESU 58513 LokSound V5 MM XL Screw, Large Scale Sound Decoder With Screw Terminals, Steam
Your Rating
Got Questions?
Our experts are here to help!
Call Us