DCC Specialties RRampMeter IV, HP Circuit Module with Battery Backup

RRampMeter Manual

RRampMeter Version IV ***SPECIAL ORDER *** High power circuit module with battery backup. Designed and built soecifically for power hungry heavy metal uses! Accurately measures DCC, AC and DC Volts and Amps! DCC - 38.6 V, 18-20 A; DC - 38.6 V, 18-20 A; AC - 27.6 V, 18-20 A; PCB length 5.63"; Enclosure length 4", width 2", height 1.25"   The amazing RRampMeter designed for Model Railroaders by DCC Specialties does what no other meter can do! Easy walk-around measurements of layout voltage drops, accurate booster output setup to optimum voltages for decoders and sound units.

• The only inexpensive device that accurately measures DCC Volts/Amps.


• Also measures AC and DC Volts/Amps.


• Costs less than DVMs that cannot measure DCC. Ver I, II, & III rated at 10 Amps and Ver IV rated at 20 Amps.


• Measures true RMS Volts/Amps, +/- 2%.


• Suitable for all scales.


• No batteries required.


• Designed for Left/Right-hand use.


• PCB length 5.63"; Enclosure length 4", width 2", height 1.25"


• 4 Styles Available:
  
  
  1. 
     
     1. Version I 
        RRampMeter Circuit Module without enclosure (Fig. 2)
     
     
     2. Version II 
        RRampMeter with Enclosure and Clip Leads (Fig. 3)
     
     
     3. Version III RRampmeter Same as II. 
        with Battery backup for measurements below 7 Volts
     
     
     4. Version IV 
        RRampmeterHP Same as III but for large Scale high voltage and current applications: DCC: 38.6 v and 18-20 Amps AC: 27.6 v and 18-20 Amps DC: 38.6 v and 18-20 Amps
     
     
  
  

"I have found it a valuable tool for troubleshooting layout and engine problems. If it only saves 1 sound decoder or booster, it has paid for itself." - Keith

Fig. 1 - Panel Mount	Fig. 2 - Direct Contact Voltmeter shown without enclosure.
Fig. 3 - Current Meter

• Adjustable contacts permit direct track voltage measurements for all scales.


• Test or Clip Leads (Fig. 3) can also be used for other applications.


• Test Leads or Layout Wiring can be conveniently connected to the rear screw/socket terminals (not shown).


• Designed as a portable troubleshooting tool or as a panel-mount meter (Fig. 1).