RRampMeter Version IV
High power circuit module with battery backup. Designed and built soecifically for power hungry heavy metal uses! Accurately measures DCC, AC and DC Volts and Amps! DCC – 38.6 V, 18-20 A; DC – 38.6 V, 18-20 A; AC – 27.6 V, 18-20 A; PCB length 5.63″; Enclosure length 4″, width 2″, height 1.25″
The amazing RRampMeter designed for Model Railroaders by DCC Specialties does what no other meter can do!
Easy walk-around measurements of layout voltage drops, accurate booster output setup to optimum voltages for decoders and sound units.
- The only inexpensive device that accurately measures DCC Volts/Amps.
- Also measures AC and DC Volts/Amps.
- Costs less than DVMs that cannot measure DCC. Ver I, II, & III rated at 10 Amps and Ver IV rated at 20 Amps.
- Measures true RMS Volts/Amps, +/- 2%.
- Suitable for all scales.
- No batteries required.
- Designed for Left/Right-hand use.
- PCB length 5.63″; Enclosure length 4″, width 2″, height 1.25″
- 4 Styles Available:
- Version I RRampMeter Circuit Module without enclosure (Fig. 2)
- Version II RRampMeter with Enclosure and Clip Leads (Fig. 3)
- Version III RRampmeter Same as II. with Battery backup for measurements below 7 Volts
- Version IV RRampmeterHP
Same as III but for large Scale high voltage and current applications:
DCC: 38.6 v and 18-20 Amps
AC: 27.6 v and 18-20 Amps
DC: 38.6 v and 18-20 Amps
“I have found it a valuable tool for troubleshooting layout and engine problems. If it only saves 1 sound decoder or booster, it has paid for itself.”
Fig. 1 – Panel Mount
Fig. 2 – Direct Contact Voltmeter
shown without enclosure.
Fig. 3 – Current Meter
- Adjustable contacts permit direct track voltage measurements for all scales.
- Test or Clip Leads (Fig. 3) can also be used for other applications.
- Test Leads or Layout Wiring can be conveniently connected to the rear screw/socket terminals (not shown).
- Designed as a portable troubleshooting tool or as a panel-mount meter (Fig. 1).