Atlas Classic HO ALCo RS-11 Gold, ESU LokSound/DCC
Duluth Winnipeg & Pacific #3614
Atlas Item # 10 002 158
- DCC/Sound version available with LokSound decoder
- Golden-white LEDs
- Realistic die-cast mainframe
- Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting
- Factory-equipped with AccuMate® knuckle couplers
- Separately-applied wire grab irons
- MU hoses and coupler cut bars
- Two painted crew members
- NMRA 8-pin plug for DCC
Sound Features for Gold Series :
- Supports all DCC-programming modes
- Flexible mapping of function keys F0 to F28.
- A total of six DCC function outputs are available
- Follows all NMRA DCC standards and recommended practices.
Analog (DC) Operation:
- The LokSound Select Dual-Mode decoder allows your Atlas Gold Series locomotive to be used on DC as well as on DCC layouts.
- Please note that the Atlas Quantum Engineer will NOT operate an Atlas Gold Series locomotive equipped with a LokSound Select decoder on an analog (DC) layout. However, the sound and lighting functions of the LokSound Select decoder in the Atlas Gold Series RS-11 locomotive can be controlled by an easy-to-use basic DCC system
- Also note that on a DC-powered layout, a DCC and sound equipped locomotive (such as the Atlas Gold Series RS-11) CANNOT be consisted with another locomotive that does not also have both DCC and sound. (This statement does NOT apply to DCC-equipped locomotives operating on a DCC layout.)
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
- There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
- Manual and Automatic Notching modes with the ability to change modes ”on the fly” are provided for true realism.
The first RS-11s were produced by Alco in early 1956. This locomotive, classified by Alco as model DL-701, was their replacement for the very popular RS-3 road-switcher. Featuring a V-12, 1,800hp 251B diesel engine, the RS-11 was Alco’s answer to EMD’s very successful GP9. The turbocharged RS-11 accelerated faster, had a higher tractive effort rating and typically used less fuel than the competition. It was also quite versatile and could be found in heavy haul freight as well as passenger service.
The largest owner of RS-11’s was Norfolk & Western which purchased a total of 99 units (an additional 35 were added to the fleet after the merger with Nickel Plate). Other major purchasers included Northern Pacific, Pennsylvania and Southern Pacific, all of whom placed repeat orders. With approximately 426 units built for the US and Mexico over 8 years of production, the RS-11 was successful for Alco in that it provided ongoing competition for EMD’s popular road-switchers. A few examples of this model are still in service today and can be found working for various shortlines in the US.