June 28, 2010

New Digitrax Products for July

Buy Digitrax Decoders Here
Discuss This Article

Digitrax has announced several new products for July 1, 2010 release.

SDN144K1E
$69.95 msrp Sound/Motor/Function Decoder (Buy)

• Board replacement decoder for N Scale Kato SD40-2 and similar locos
• Preloaded with a Dual SD40-2/GE-Evolution diesel schemes
• 4 FX3 Functions
• 1 Amp Continuous/1.25 Amp Peak Rating
• 13mm 8 Ohm round speaker and 330uF capacitor
• Full Digitrax Series 4 mobile decoder feature set
  • Speed Tables
  • Simplified Scaleable Back EMF
  • Advanced Consisting
  • Forward and Reverse Trim
  • Transponding
  • Supersonic Motor Drive
  • Decoder Lock and much more
• Use PR3 and SoundLoader Software to download your own fully customizable sound scheme to the decoder
• No external sensor required for sound workload changes

DN135D
$18.95 msrp (Buy)

Tiny Super Economical Motor & Function Decoder

• Fits many N and HO Scale Locomotives
  
• Digitrax N Scale Harness and Plug arrangement for economic decoder sharing options
  
• 0.55" x 0.406" x 0.2"
  
• 13.86mm x 10.3mm x 4.83mm
  
• 3 FX3 Functions
  
• 1 Amp Continuous/1.25 Amp Peak Rating
  
• Full Digitrax Series 5 mobile decoder feature set
  • Speed Tables
    
  • Simplified Scaleable Back EMF
    
  • Advanced Consisting
    
  • Forward and Reverse Trim
    
  • Transponding
    
  • Supersonic Motor Drive
    
  • Decoder Lock and much more

DN135PS
$21.95 msrp (Buy)

Tiny Super Economical Motor/Function Decoder with 2" wires and DCC 8-pin Medium Harness

• Same features as DN135D above
  
• Great for tight space HO installations where an 8 pin DCC socket is available

DNWH
$14.95 msrp (Buy)

5 pack Digitrax N-Scale Wire Harness

• Lets you share decoders among locomotives
  
• 4" wires make it easy to install in N or HO

DNWHPS
$5.95 msrp (Buy)

Digitrax N-Scale Wire Harness with 8 Pin plug

• Lets you share decoders among locomotives
  
• 2" wires from Digitrax plug to DCC 8 pin plug
  
• Fits many HO locomotives with 8 pin socket

DNDP (5 pack)
$19.95 msrp (Buy)

Dummy plug for Digitrax N scale Harness system

• Lets you run locos as DC or DCC
  
• For DC only operation use the dummy plug with either DNWH or DNWHPS
  
• For DCC operation remove the DNDP and replace with a decoder