Search results for:
PSX Circuit Breakers and Easy DCC
By fisker76
The EasyDCC system has a hair trigger, so when the PSX tries to auto-reset with the fault still in place, the EasyDCC trips. The fix is easy. Connect a jumper from J7-1 to J7-2. This will place the PSX into the manual reset mode. It will trip, but not try to reset, thus isolating the fault and leaving the rest of the system on. Once the fault is fixed, you can reset the breaker by either opening the jumper (e.g. using a normally closed push button in series with the jumper; pushing the button will open the jumper to reset the PSX) or by sending an accessory ON command to accessory address 2042.
