Dual output DCC stationary decoder. Patent pending.
The Wabbit DCC stationary decoder operates 2 DC stall motor type switch machines and features the same patented unmatched performance of its popular kin the HARE.
More Info | Review | Buy Tortoise™ | Picture Gallery
Hare vs. Wabbit, Time vs. Money
Programming for Digitrax
Recommended control switches to use with the Wabbit™ & Hare™
SPDT 5AMP 120V C/O, SPST Momentary 1/4", SPDT 5AMP 120V C/O 1/2"

Dual output DCC stationary decoder with feedback reporting. Patent pending. Includes all the special features of the Wabbit plus feedback turnout position reporting to Digitrax LocoNet, Lenz ExpressNet and NCE CabBus.
More Info
Review
Buy Tortoise™
Picture Gallery
Recommended control switches to use with the Wabbit™ & Hare™
SPDT 5AMP 120V C/O, SPST Momentary 1/4", SPDT 5AMP 120V C/O 1/2"

Revolutionary DCC stationary decoder. In stock! Patent pending.
Plugs Directly on to Tortoise™ (App Notes, Manual). Version I has been significantly improved to make wiring even easier along with other new features. All Power Routing is now controlled by a user selectable dip switch. Version II provides Feedback and Switch Position reporting for Digitrax LocoNet, Lenz ExpressNet and NCE CAB Bus. Version II also includes all the updated features of Version I.
More Info | Buy Tortoise™ | Picture Gallery
Hare vs. Wabbit, Time vs. Money
Programming for Digitrax
Recommended control switches to use with the Wabbit™ & Hare™
SPDT 5AMP 120V C/O, SPST Momentary 1/4", SPDT 5AMP 120V C/O 1/2"

Revolutionary DCC stationary decoder. In stock! Patent pending.
Plugs Directly on to Tortoise™ (App Notes, Manual). Version I has been significantly improved to make wiring even easier along with other new features. All Power Routing is now controlled by a user selectable dip switch. Version II provides Feedback and Switch Position reporting for Digitrax LocoNet, Lenz ExpressNet and NCE CAB Bus. Version II also includes all the updated features of Version I.
More Info | Buy Tortoise™ | Picture Gallery
Hare vs. Wabbit, Time vs. Money
Programming for Digitrax
Recommended control switches to use with the Wabbit™ & Hare™
SPDT 5AMP 120V C/O, SPST Momentary 1/4", SPDT 5AMP 120V C/O 1/2"

Quad stationary decoder. Cost effective stationary decoder for addressing four slow motion turnout motors. DS44 can access any four addresses you choose.
More Info
More details at Stationary Decoder Comparison

Stationary decoder for Kato Turnouts (Unitrak), One Output.

Dual Stationary Decoder. Control 2 slow motion turnout machines or Control 2 solenoid type turnout machines or Control 2 Kato Unitrack or LGB turnouts.
Quick setup, independent addresses.
More details at Stationary Decoder Comparison

Quad Stationary Decoder, operates solenoid, slow motion, Kato + Aristocraft switch machines

Quad DCC Function Decoder with Integrated Transponder. Four 125mA (250mA peak) function output for lights or other functions; Functions can be turned on/off using F0-F12; Supports both 2 digit and 4 digit addressing; Programmable from DCC compatible equipment; Configurable Strobe feature lets you simulate flashing lights like FRED,Strobes, Mars Lights, etc. on the yellow and white leads; Standard On/Off Function operation available on green & violet leads; Compatible with Digitrax DCC Transponding Systems; Approximate size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)

Control signals on your layout manually with any LocoNet Throttle and Command Station or automatically with detection and compatible computer software such as RR & Co. and WinLok. Drives up to 32 signal heads with popular LED signal types. Simple modular wiring. 16 inputs, 8 Control lines for local turnout control, 8 occupancy sensor inputs. DC or DCC controlled layouts
MORE INFO

Sets of 3 Signal Masts that can be used as Signal Mast bases in any scale or can be painted and detailed as N-scale signal masts.
MORE INFO

Materials for making 2 Signal Driver Cables for SE8C. Includes 20 feet of 10-wire ribbon cable and 8 Ten pin connectors.
MORE INFO

Under layout mounting hardware for Signal Driver Cables and sockets. 6 metal signal straps and 6 signal spacers.
MORE INFO

Terminal strip board with resistors installed for easy installation of most brands of LED type signal masts.
MORE INFO

Function only decoder with extended effects. 4 functions, 0.4A.

Accessory decoder, all scales, 4 functions, w/feedback (4 outputs)
Compare to others.

TO BE REPLACED BY LS150
Accessory decoder, all scales, 4 functions, w/o feedback (4 outputs).
Compare to others.

Controls up to 6 independent switch machines, compatible with all NMRA DCC systems. 1024 accessory decoder addresses, sequential or up to 6 independent addresses can be used. High amperage output to enable safe operation of Peco and Atlas dual coil switch machines, each output short protected. Any combination of 6 Atlas, Bachman Easy Track, Kato Unitrack, LGB turnouts, Peco, Tortoise™, or other popular brands.
MORE
PICTURE
REVIEW!

Due to manufacturer production issues we are not currently accepting orders for this item. Please check the site regularly for the actual release.
Signal decoder for up to 4 signal heads.

The Snap-It, intended for twin coil switch machines, features a single output.
See it in Gallery
Review!

Used for Kato Turnout Motors, features a single output.
Review!

Turnout decoder for Tortoise™.
More info is here.
More info and picture
Comparison of Stationary Decoders

Stationary decoder for 8 Tortoise™ switch machines.

Stationary decoder. The SMD82 is an eight (8) output DCC accessory decoder specially suited to drive switch (turnout) machines. It features 16 remote and four local programmable routes. The SRC8 can be used with the SMD8 to provide switch position reporting (feedback) if desired.
More details at Stationary Decoder Comparison

Stationary Switch Machine Decoder - 4 switches, all scales, 4 amps, 4 functions
Comparison of Stationary Decoders