| |
Signaling, Block Detection, Transponding
SEE ALSO
CTI Electronics
Integrated Signal Systems
|
 |
The Block Watcher™ is a new concept in block detection.
This detector puts the power of a microprocessor to work analyzing the current feed to the rails. This detector has been designed to eliminate many of the installation problems associated with the installation of signal systems. The Block Watcher comes ready to install, all you have to do is to connect it between the DCC booster or circuit breaker and the rails. Then connect the detector output switch to your signal system.
The Block Watcher™ has many uses and applications.
It can not only be used as the basis of signaling systems, but can also be used to indicate occupied blocks or triggers for Stop-On-DCC decoders. The Block Watcher is powered from the DCC input power and eliminates the need for an added external power supply. The output is optically isolated so the signaling system can be separate from the DCC signal and thus minimize the interference with operation of the signal circuits. The detector will handle up to 20 Amps of DCC current. An automatic adjustment for leakage current up to 130 mA is provided. Detection output terminals are available for a switched output and remote LED block detect indication. The bi-polar output can be used with any signaling system using less than 30 Volts and will switch up to 1 A of current.
More
Info, Features in Detail |
|
Hare™ - Tortoise™
New Generation I. Combos
DCC
Specialties |
$varies
List $varies |
|
 |
|
|
Hare™ - Tortoise™
New Generation II. Combos
DCC
Specialties |
$varies
List $varies |
|
|
|
|
The Tortoise™, the Tortoise™ Logo and the Tortoise™
graphic are trademarks of Circuitron, Inc. of Romeoville, Il. They and all photos
of the Tortoise™ are used with permission. The Hare™ is a product
of DCC Specialties, which is in no way affiliated with Circuitron, Inc.
SE8C Signal Decoder
Digitrax. |
$99.95
List $125.00 |
|
 |
|
Control signals on your layout manually with any LocoNet Throttle and Command Station or automatically with detection and compatible computer software such as RR & Co. and WinLok. Drives up to 32 signal heads with popular LED signal types. Simple modular wiring. 16 inputs, 8 Control lines for local turnout control, 8 occupancy sensor inputs. DC or DCC controlled layouts
MORE INFO
|
|
SMBK Signal Mast Base Kit
Digitrax. |
$11.99
List $14.99 |
|
|
|
Sets of 3 Signal Masts that can be used as Signal Mast bases in any scale or can be painted and detailed as N-scale signal masts.
MORE INFO
|
|
SDCK Signal Driver Cable Kit
Digitrax. |
$15.99
List $19.99 |
|
|
|
Materials for making 2 Signal Driver Cables for SE8C. Includes 20 feet of 10-wire ribbon cable and 8 Ten pin connectors.
MORE INFO
|
|
SMHK Signal Mounting Hardware Kit (Due September 15)
Digitrax. |
$9.49
List $11.65 |
|
|
|
Under layout mounting hardware for Signal Driver Cables and sockets. 6 metal signal straps and 6 signal spacers.
MORE INFO
|
|
TSMK Terminal Strip Mounting Kit
Digitrax. |
$11.99
List $14.99 |
|
|
|
Terminal strip board with resistors installed for easy installation of most brands of LED type signal masts.
MORE INFO
|
|
|
|
Quad Occupancy Detector, Replaces
BD1.
Cost Effective occupancy detection for 4 detection sections. Outputs
for panel mounted LEDs to display occupancy. Detects any powered locomotive.
Detects un-powered rolling stock equipped with resistor wheel sets.
Can transmit occupancy information to your LocoNet System using DS54
or SE8C (sold separately).
Using
Team Digital SIC 24 with Digitrax BD4 (external link)
Note - "I had problems with the BD4 - I am running this as standalone and could not get it to indicate anything. I found on the internet a tip for adding a ground wire from DS pin 2. This info is missing from the Digitrax tech sheet."
|
|
BD1 - obsolete, replaced by BD4
Digitrax. |
List $9.99
|
|
|
|
All scales, block occupancy
detector for DS54.
STOCK STATUS TBD, PLEASE CONTACT THE MANUFACTURER !!!
|
|
|
|
|
|
LocoNet Occupancy Detector, Replaces BDL162
Cost Effective occupancy detection for 16 detection sections. Outputs for panel mounted LEDs to display local occupancy & power zone status. Can be connected to LocoNet to transmit occupancy information to your LocoNet System. Detects any powered locomotive. Detects un-powered rolling stock equipped with resistor wheel sets. Improved Digitrax Transponding in 8 zones by adding 2 RX4 Transponder Receivers (sold separately). Ops Mode Read Back allows you to read back CV Values on the mainline using Transponding.
Shipping July 15, 2004.
|
|
BDL162 - obsolete, replaced by BDL168
Digitrax. |
List $125.00
|
|
|
|
16 block occupancy and
zone power with transponding.
STOCK STATUS TBD, PLEASE CONTACT THE MANUFACTURER !!!
|
|
|
|
|
|
4 block transponding
receiver for BDL16.
|
|
TF4
Digitrax. |
$17.75
4 @ $16.75, 10 @ $15.75
List $20.95 |
|
|
|
Quad DCC Function Decoder with Integrated
Transponder. Four 125mA (250mA peak) function output for lights or
other functions; Functions can be turned on/off using F0-F12; Supports
both 2 digit and 4 digit addressing; Programmable from DCC compatible
equipment; Configurable Strobe feature lets you simulate flashing
lights like FRED,Strobes, Mars Lights, etc. on the yellow and white
leads; Standard On/Off Function operation available on green &
violet leads; Compatible with Digitrax DCC Transponding Systems; Approximate
size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)
|
|
|
|
|
|
33"
HO Detectable Wheelsets (package of 4)
|
|
|
|
|
|
28"
HO Detectable Wheelsets (package of 4)
|
|
|
|
|
|
36"
HO Detectable Wheelsets (package of 4)
|
|
|
|
|
|
33"
N Detectable Wheelsets (package of 4)
|
|
|
|
|
|
detects
trains and controls 3-color signals for 2 blocks; current sensing
detectors handle up to 6A of track power; many track arrangements
supported; block-occupied outputs for panel lights or computer
interface
|
|
|
|
|
|
translates
individual green, yellow and red signal status inputs into proper
control signals for operating the bipolar LED found in searchlight
signals; controls 2-lead or 3-lead bipolar LED-based signals
|
|
|
|
|
|
detects
trains and controls 3-color signals for up to 8-blocks; up to
6A of track power; block-occupied outputs for panel lights or
computer interface; can control searchlight signals using SearchlightMaster(TM)
and Tomar semaphore motors using the SemaphoreMaster(TM)
|
|
|
|
Due to manufacturer production issues we are not currently accepting orders for this item. Please check the site regularly for the actual release.
Signal decoder for up to 4 signal heads. |
|
|
|
Signal Decoder plus Detector, controls 2 signal heads, use with DCC
Works with double gapped or common rail layouts
Can operate any signals on the market (searchlight, 2/3 light, position light)
Up to 32 different aspects
Each Sig-12 operates 2 signal heads
Simple signals to full prototype with interlockings
Automatic operation can be overriden by computer or CT panel if desired |
|
Tower Controller (TC-64)
RR-CirKits |
$108.95
List $127.99 |
|
|
(Tower Controller) 64 line I/O controller, configured as 8 eight line ports. Each line may drive up to 15ma. at 4.5V when configured as an output and is equipped with 4.7K pull up resistors to allow use with contacts, open collector, or logic level circuits when configured as an input. Includes connectors and LocoNet® cable.
Review |
|
Block Occupancy Detector (BOD-8)
RR-CirKits |
$35.95
List $41.65 |
|
|
This board operates as a DCC occupancy detector for 8 blocks using remote CT coils. It outputs logic levels, and has a Tower Controller standard ribbon connector interface. The "Power-Lok" feature monitors the DCC bus power. A power failure latches the detection status of each block until power is restored and re-stabilized. |
|
|
|
8 CT (Current Transformer) coils for BOD-8CTL. These 100:1 toroid coils sense the track current on leads passing through the hole in the middle of the coil. They connect to the BOD8-CTL with twisted pair cable such as CAT-3 or CAT-5 network cable. (up to 4 coils per cable) |
|
DC 'H' Bridge Driver (DCDB-8)
RR-CirKits |
$38.95
List $45.30 |
|
|
(DC 'H' Bridge Driver) Normally operates as eight independent "H" bridge motor drivers for control of 8 switch machines. (E.g. Tortoises™) It outputs DC at whatever voltage is supplied to the board via an external connector. (25VDC maximum) Each output line is rated at 1/4 amp continuous, 1 amp momentary. The DCDB-8 has a Tower Controller standard ribbon connector interface. (Note: This version of the board is limited to not more than 4 units per TC-64) |
|
4 Aspect Signal Driver Rev-b (4ASD-4)
RR-CirKits |
$20.95
List $24.87 |
|
|
(4 Aspect Signal Driver Rev-b) This board is specifically designed to drive simply wired 3-4 aspect position signals utilizing 3 yellow LED's in series for each position by providing 9V to the internal dropping resistors. Multiplexed outputs allow for direct drive of four 3 or 4 aspect signal heads mounted along a single 10 wire cable. No extra hardware is required at each signal head. The 4ASD-4 has a Tower Controller standard ribbon connector interface. |
|
Single Coil Solenoid Driver (SCSD-8)
RR-CirKits |
$30.95
List $35.98 |
|
|
(Single Coil Solenoid Driver) This 8 line, optically isolated, single ended, high current, high voltage DC driver can drive up to 1A per line at up to 30VDC. (PTC fuse limited to 2-3A total per board for safety) The SCSD-8 has a Tower Controller standard ribbon connector interface. |
|
10 Conductor Flat Ribbon Interface Cable (CAB-10x100)
RR-CirKits |
$10.49
List $12.25 |
|
|
(10 conductor flat ribbon interface cable) 100' rolls, #28 AWG gray with red stripe on line 1. Used to connect any daughter cards to the Tower Controller. Also used to connect signals to the 4ASD board or to the Tower Controller. (cable is heavy and may incur extra cost for shipping) |
|
10 Position IDC Socket (IDC-S10x25)
RR-CirKits |
$5.29
List $6.25 |
|
|
(10 position IDC socket) Box of 25 Insulation Displacement Connectors for use with 10 wire flat ribbon cable. |
|
|
