The ECoS 50200 is already the second generation of our successful ECoS command station. With the latest ECoS command station, ESU continues to offer state-of-the-art digital technology combined with contemporary functional range and easy handling all this for a fair price-performance ratio. The ECoS has - like most of the recent central stations - a large colored display with high resolution. In combination with its ground-breaking and easily operated user interface and excellent contrast values of the colored screen, ECoS reaches unprecedented ergonomics: unlike all the other central stations, the ECoS can be also operated without a stylus - all symbols and writings are hugely marked and clearly structured. ECoS has 9 function keys per integrated cab. The light, and function keys 1 to 8 show the current state of the function via LEDs. Discover the fascinating possibilities of the ECoS command station on the following pages. But take heed: ECoS performance is so good, that even we had to re-read a few passages to believe it!

Hardware:
H4 booster with 4.0 A continuous-load output
RailCom® bidirectional feedback detector with integrated cutout device ("global detector")
H4 programming track connection, 0.6 A rated
7 inch TFT colour display with touchscreen, 800x480 (pixels) display resolution
32-Bit ARM 720T controller, 64 MByte flash ROM, 32 MByte RAM, Linux® operation system
16 Bit real-time co-processor
2 motor-driven potentiometer throttles with end stop
two 2-way analog joysticks; two 9-function keys plus stop- and go-key
3 input sockets for ECoSlink systems
Connection for ECoSlink bus expansion
Galvanically isolated booster input for external DCC or Märklin® 6017 boosters
Galvanically isolated ECoSniffer input for connection of old units
Galvanically isolated s88-bus input for feedback devices; 10/100 Mbit ethernet connection (RJ45)
1 ECoSlot module for radio-receiver input

Software:
C with 14, 28, 128 speed steps, LGB® compatible function key handling
RailCoM®
Märklin® Motorola® old, new, with 14 or 27 speed steps (2 modes, depends on availability of decoder)
Selectrix® track format
M4 data protocol with automatic recognition
Up to 9999 addresses for DCC protocol. Up to 20 function keys per loco
Up to 255 addresses for Motorola® protocol (depends on availability of decoder)
Märklin® Motorola® and DCC track protocol for control of electromagnetic accessories
Up to16384 locos, 2048 turnouts and 1024 route objectives; 32 MU´s (multiple consists) with up tp 16 locos each
Up tp 16 shuttle trains (back´n forth) at the same time
All DCC service modes programming on programming track, POM (programming on the main)
Programming of Motorola® and Selectrix® on programming track.

Included in delivery:
ECoS central unit
Stylus for touch screen
Power supply output voltage adjustable from 15V to 21V / 5A (90VA)
Terminals for mail track and programming track connection, ECoSniffer
Extensive instruction manual

Dimensions:
37.0 cm x 16.0 cm x max. 9.0 cm

• ext. Booster 4A, DCC / MOT/SX/mfx®, power supply 110-240V, EU+US cord

• ext. Booster 8A, DCC / MOT/SX/mfx®, power supply 110-240V, EU+US cord

A digital command station using a bi-directional infrared technique. Some of the features include:
- ability to run up to 40 DCC speaking locomotives
- with the wide-angle optic you can reliably control your layout with a visual contact, no need for direct contact with receiver
- multiple consists moving up to six locomotives at one time is possible
- read and change CVs on the programming track
- control magnetic accessories
- ability to connect up to five IR receivers
- ECoSlink system bus connection (connect your Navigator with the ECoS)

ESU Navigator Handheld

ESU Navigator IR Receiver

• Accessory decoder for 4 twin coil magnetic articles, 2 x Servo, DCC / MM, 1A

• 4 Twin-Relays (DPDT) output, 2A each, extension for SwitchPilot V1.0

• jacks for NEM652, NEM651, 21-Pin, single wire, with motor, LED Monitor and 20mm speaker