The Train-Brain board can control 4 devices and monitor 4 sensors. Each of its controllers is rated for 10 Amps, and can be used to control AC or DC devices. It's sensors ports are fully adjustable, and are compatible with all popular forms of train detection, including magnetic, IR, photocell, and current detection.

The Train Brain-8, (or "Dash-8" for short), is an all-control version of the Train-Brain. It can control 8 devices. Each of its controllers are rated for a whopping 10 Amps, and can be used to control AC or DC devices. As a complement to the original Train-Brain, the Dash-8 is a cost effective solution to control-intensive applications where high currents are involved.

The Watchman is an all-sensing version of the Train-Brain. It can monitor 8 sensors. The Watchman features 8 individually adjustable sensor ports, and is compatible with all popular forms of train detection, including magnetic, IR, photocell, and current detection.

...

For Dual-Coil Solenoid Machines
The Switchman is our most cost-effective general-purpose control solution. It can control 16 devices. Each of its controllers are rated for up to 28 Volts DC at 2 Amps. With built-in protection against kickback from inductive loads, it's the perfect choice for controlling moderate current DC loads such as lighting, small motors, solenoids, relays, etc.

The Sentry is the cost-effective solution when your layout demands lots of sensing capability. It can monitor 16 sensors. The Sentry features 16 fixed-sensitivity sensor ports, and is compatible with all popular forms of train detection, including magnetic, IR, photocell, and current detection. It's also great for monitoring pushbuttons, motion sensors, light sensors, etc. At just $4.38 per sensor port, the cost of sensing has never been so low.

For Stall Motor and Single-Coil Machines
The YardMaster is optimized for the job of switch machine control. It can control up to 16 switch machines. The YardMaster is compatible with all forms of switch machine hardware, including dual-coil solenoid, single-coil solenoid, and stall motor driven siwtch machines. With built-in protection against kickback from inductive loads, like it's namesake, it's ready to handle all of your railroads siwtching needs.

The Smart-Cab allows computer control of speed, direction, and momentum of all DC operated trains. Trains can respond automatically to signals, run according to scheduled timetables, etc, all under PC control. Smart Cab provides a hefty 50 Watt output capacity, with full overload and short-circuit protection.

Each Signalman controls 16 signal lights. It works with all block, searchlight, and positional signals, and can implement any signalling protocol. Also great for controlling grade crossing flashers, traffic lights, warning beacons, etc.
-CC version for use with common cathode LED signals
-CA version for use with common anode LED signals
-BP version for use with bipolar LED signals
-IC version for use with incandescent lamp signals

Each Signalman controls 16 signal lights. It works with all block, searchlight, and positional signals, and can implement any signalling protocol. Also great for controlling grade crossing flashers, traffic lights, warning beacons, etc.
-CC version for use with common cathode LED signals
-CA version for use with common anode LED signals
-BP version for use with bipolar LED signals
-IC version for use with incandescent lamp signals

Each Signalman controls 16 signal lights. It works with all block, searchlight, and positional signals, and can implement any signalling protocol. Also great for controlling grade crossing flashers, traffic lights, warning beacons, etc.
-CC version for use with common cathode LED signals
-CA version for use with common anode LED signals
-BP version for use with bipolar LED signals
-IC version for use with incandescent lamp signals

Each Signalman controls 16 signal lights. It works with all block, searchlight, and positional signals, and can implement any signalling protocol. Also great for controlling grade crossing flashers, traffic lights, warning beacons, etc.
-CC version for use with common cathode LED signals
-CA version for use with common anode LED signals
-BP version for use with bipolar LED signals
-IC version for use with incandescent lamp signals