| |
RRampMeter Image Section
of Tony's Picture Gallery
|
|
| RRampMeter at Rest |
 |
| This photo represents a typical installation
utilizing the RRampmeter to measure DCC current and voltage.
Notice the output of the DCC Booster is wired to the input screw
terminals of the RRampmeter. These screw terminals can be mounted
on the front or backside of the circuit board depending on your
usage. The output of the RRampmeter using the same terminals
is wired to the track section, layout, where current is to be
measured. The DCC throttle is set at zero speed and the RRampmeter
is showing the track voltage with the green indicator light
signifying DCC voltage. |
|
